Product Details

• Part Number The lawn mower blades part number is AM130172,Also replace AM128013 AM126023.The mowing blades kit included 2 x replacement blade for lawn tractors and 2 x blade bolts.Regular inspection and sharpening of the blade are important for optimal mower performance. If the blade becomes damaged, bent, or excessively dull, it should be replaced to prevent damage to the mower or an uneven cut on the lawn.
• Replacement Mower Blade AM130172 blades designed for 42" John Deere Mower decks; center hole is slotted circle 1 inch, Blade length: 21 inches, Width: 5.5 inches, Thickness: 2.3 inches. Please confirm the model you require by removing the old blade and inspecting the part number printed on the blade.
• Compatibility This mower replacment blades set compatible with John Deere Lawn Tractors Models 325 335 345 355D 42C 48C 54C GX355 LT133 LT155 LT160 LT166 LT170 LT180 SST16 X324. (NOTE: Use a wooden block to prevent the blades from turning when removing/tightening the bolts.)
• Easy Installation 1. Check mower to be sure you are installing the blades on the correct side. 2. Position mower blades with the cutting edge towards the ground onto the mower spindle and align key on bottom of spindle with slot in blade. 3. Install and hand tighten bolt with washer until mower blade is in full contact (fully seated) with spindle. 4. Hold mower blade with glove to prevent spinning, tighten bolts to 57 Nm (42 lb-ft). 5. Check mower deck timing and adjust if neces
• High Quality AM130172 blades kit are made from durable steel, heat-treated for strength and resistance to bending or breaking under normal usage conditions. This sures a clean cut and longevity of the blade. Sharp-edged blades cut grasscleanly and make their waythrough grass more efficiently.

am130172 blades kit included 2 x replacement blade and 1x bolt