Product Details

• Product Dimensions: 9.45 x 8.86 x 4.13 inches
• Item Weight: 12.2 pounds
• Manufacturer: SCITOO
• Country of Origin: China
• Item model number: 102397-5410

• FITMENT: The PTO Clutch Fit for Big Dog: 601311, 601311K / for Hustler: 601311, 601311K / for Warner: 5218-154, 5218-222
• COMPACT UNIT AND ECOATING: Since the clutch and the brake functions are contained in one single unit, which taking up a relatively small amount of space.In some possible cases, all parts in the clutch are e-coated to provide maximum aegis.
• SECURITY: Operator security is enhanced with the use of these clutches, since they serve as reliable means of mower deck and implement control. The device, along with a clutch brake, is used in remotely accessing the cutting wheel, thus allowing the user to control the implement from a distance. Electric clutches reduce costs and increase profits by allowing the accurate application of seed and top soil only where they are needed.
• SIMPLE INSTALLATION: Since the majority of clutches are one piece designs that come in pre-set, there are no adjustments to make either at the mower manufacturer or with the end user.
• INDUSTRY COMPLIANCE: PTO clutch/brakes help to meet industry stop times by assisting the blades to a stop.Whats more, high-temperature bearing grease is rated more than twice what is required.

THE PTO CLUTCH FITS THE FOLLOWING MACHINES: for Hustler Mini Z 44″ andamp;
52″, Super Mini Z 44″ andamp; 52″ for Big Dog X-Series OEM PART NUMBER: for
Big Dog: 601311, 601311K for Hustler: 601311, 601311K for Warner: 5218-154,
5218-222 SPECIFICATIONS: Quality Warranty: 12 months ID: 1 1/8″ Height: 3
5/16″ Pulley Diameter: 6 5/16″ Belt Width: 5/8″ Rotation: Clockwise NOTICE:
Here are some possible problems you may encounter during the operation, the
following points may help you. Ø Output stalled. If output is stalled, clutch
could slip to the point where it will burn up either bearings or the
field.This means you have to replce the clunch. Ø Clutch not burnish.If full
torque is required immediately and clutch is not burnished, it will slip and
could become galled.Try to reburnish clutch. If slipping is to severe, clutch
will have to be replaced. Ø When the Voltage is not releasing.There may be a
switch failure, which reminds you that you should change the switch.