Product Details

• Product Dimensions: 8.46 x 7.87 x 4.92 inches
• Item Weight: 9.79 pounds
• Manufacturer: SCITOO
• Item model number: 109684-515

• FITMENT: The PTO Clutch Fit for Husqvarna Models: 2754GLS, GT2254, GTH 2548, GTH 26V48LS, GTH260, GTH 2648, GTH 2654, GTH 2654T, GTH 27V52LS, GTH 2752TF, GTH 24K54, GTH 24V52LS, GTH 263T, GTH 264T, GTH 27V48LS, GTH 3052TF, LGT2554, LGT 3554, LGT 2654, LGTH22V48, LGTH 2454, YTH 2454, GTH 3052TDF, YTH220, Z448, Z454, Z454X; for Jonsered Models: LT2223 A2, LT2227 A2, LGT54, Z52XF; for Poulan Pro Models: PB23H48LGT, PBGT26H54, PBLGT26H54, PP22V48, PPLGT2248
• COMPACT UNIT AND ECOATING: Since the clutch and the brake functions are contained in one single unit, which taking up a relatively small amount of space.In some possible cases, all parts in the clutch are e-coated to provide maximum aegis.
• SECURITY: Operator security is enhanced with the use of these clutches, since they serve as reliable means of mower deck and implement control. The device, along with a clutch brake, is used in remotely accessing the cutting wheel, thus allowing the user to control the implement from a distance. Electric clutches reduce costs and increase profits by allowing the accurate application of seed and top soil only where they are needed.
• SIMPLE INSTALLATION: Since the majority of clutches are one piece designs that come in pre-set, there are no adjustments to make either at the mower manufacturer or with the end user.
• INDUSTRY COMPLIANCE: PTO clutch/brakes help to meet industry stop times by assisting the blades to a stop.Whats more, high-temperature bearing grease is rated more than twice what is required.

THE PTO CLUTCH FITS THE FOLLOWING MACHINES: For Husqvarna Models: 2754GLS, EZ
5224 BF, GT2254, GTH 2548, GTH 26V48LS, GTH260, GTH 2648, GTH 2654, GTH 2654T,
GTH 27V52LS, GTH 2752TF, GTH 24K54, GTH 24V52LS, GTH 263T, GTH 264T, GTH
27V48LS, GTH 3052TF, LGT2554, LGT 3554, LGT 2654, LGT 24K54, LGTH22V48, LGTH
2454, YTH 2454, GTH 3052TDF, YTH220, Z448, Z454, Z454X For Jonsered Models:
LT2223 A2, LT2227 A2, LT2323 A2, 2754GTHI, GT52F, LGT54, Z52XF For Poulan Pro
Models: PB23H48LGT, PBGT26H54, PBLGT26H54, PP22V48, PPLGT2248 OEM PART NUMBER:
For AYP: 532179355 For Craftsman: 174605, 414737, 532174605, GT3000 For
Husqvarna: 179335, 532179335, 532414737 For Warner: 5215-140 For Xtreme: X0169
SPECIFICATIONS: Crankshaft ID: 1.125″” Diameter Pulley: 6 1/8″” Direction:
Counter clockwise Uses belt width: 1/2″” or 5/8″” NOTICE: Here are some
possible problems you may encounter during the operation, the following points
may help you. 1.Output stalled. If output is stalled, clutch could slip to the
point where it will burn up either bearings or the field.This means you have
to replce the clunch. 2.Clutch not burnish.If full torque is required
immediately and clutch is not burnished, it will slip and could become
galled.Try to reburnish clutch. If slipping is to severe, clutch will have to
be replaced. 3.When the Voltage is not releasing.There may be a switch
failure, which reminds you that you should change the switch.