Product Details

• Brand: BOJACK
• Voltage: 288 Volts (AC)
• Item Weight: 7.3 Ounces
• UPC
• Manufacturer: BOJACK
• Package Dimensions: 6.89 x 2.48 x 1.93 inches
• Item Weight: 7.3 ounces
• Manufacturer: BOJACK
• Country of Origin: China
• Item model number: BJ-SPP6
• Batteries required: No
• Included Components: no

• Available for a variety of air conditioner compressors from 4,000 BTU window units to 120000 BTU commercial units.
• The motor starting capacitor and the PTC thermistor are connected in series, there are no loose parts and complicated wiring, only need to be connected in parallel with the running capacitor; the "piggyback" terminal wiring is adopted, which is easy to install on the running capacitor.
• Replacement Part Numbers: TJ90HS6, AP4502872, HS6, HS650, 35702, DST-6, EPP6, HS6, HS650
• Widely used in air conditioner start capacitor, air conditioner soft start, AC hard start kit, AC capacitor, hvac capacitor, hvac hard start kit, etc.

BOJACK SPP6 Hard Start Air Conditioner Relay or Capacitor Kit The SPP6 is
designed for permanent split capacitor single phase air conditioning and heat
pump systems. Starting capacitors are used in single-phase AC motors, air
conditioners, refrigerator compressors, etc. Including relays and starting
capacitors to provide 500% starting torque. If your new or old compressor
won’t start, try installing this hard-start capacitor before doing anything
else. Starting an air conditioner or heat pump compressor (reciprocating and
scroll) requires an extra electrical “shock” to start. Equipment requiring
hard-start capacitors: heat pump or condenser split systems with (TXV)
installed. Old heat pump or condenser that is mechanically stuck and not
working. Installation Notes Connect the two wires of the SPP6 in parallel with
the run capacitor (one wire on each side) without removing any of the original
wires. If all run capacitor terminals are being used, use the SPP6’s special
“piggyback” terminals. 2-wire connection:The two-wire hard-start kit is
connected in parallel with the run capacitor for Permanently Split Capacitor
(PSC) type compressors; and connects to the start and run terminals on the
compressor for Capacitor Start Induction Run (CSIR) type compressors. A third
connection to the common wire is not required. Notice: Check the model number
on the compressor (printed on the nameplate on the side of the compressor) to
determine the tonnage of the unit. 6000BTU=0.5 tons 12000BTU=1 tons
18000BTU=1.5 tons and so on. Package include： 1pcs SPP6 Hard Start Air
Conditioner Relay or Capacitor Kit